KING'S NATIONAL MATCH ALUMINUM TRIGGER Available in Long or Short length with overtravel adjustment screw FOR COLT 49 AUTOS

รหัสสินค้า : 301

INSTRUCTIONS FOR INSTALLING KING'S 

ALUMINUM TRIGGER 

1. Make sure the pistol is unloaded,.nd remove the Magazine. 

2. Disassemble frame completely; remove trigger. 

3. Install Trigger Stop Screw in Trigger flush with 

front serations. 

4. Trigger is slightly oversized for most frames, on top and bottom of trigger only. If it will not slide in freely, file small amount at a time from top and bottom of trigger, so it will fit freely with no excess Play. DO NOT REMOVE ANY MA. TERIAL FROM SIDES. 

5. Re-assemble Pistol. 

6. Make final adjustment on trigger stop screw. Adjust so trigger will just release sear and back off slightly allowing sear to clear half cock notch on hammer. This slight clearance is necessary to prevent damage to sear and hammer notch. 

7. Test for Safe Function.