ELIMINATOR BORE CLEANER, 16oz

รหัสสินค้า : BTCE-25016

INSTRUCTIONS

Bore Tech Eliminator Bore Cleaner Use Instructions

UNLOAD FIREARM

1) Wet 3 to 4 Bore Tech X Count patches with Eliminator Bore Cleaner and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction.

2) Next, make 10 to 15 passes with a tight fitting Bore Tech Proof-Positive Nylon brush saturated with Eliminator.

3) Then repeat Step 1 and let Eliminator soak for 3 to 5 minutes. For badly fouled rifles, extended soak times may be needed.

4) Finally, push dry patches through the bore until they come out clean.

5) Repeat above steps if necessary.

6) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.

7) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.